Tesla Model S Programming & Software Solutions

There are a large number of reasons why the airbag malfunction light comes on on the instrument cluster. These may be problems with electrical wiring, sensors, and the airbags themselves. Computer diagnostics do not always accurately indicate the problem but indicate the problem node. Our service technicians will find the problem and fix it.

The most common causes of Tesla autopilot failure are the need to calibrate the radar, glitches with cameras, and moisture ingress into the connectors. However, there are other causes. Whatever the cause, it would be accurately identified during diagnosis.

There are two types of key programming. The first type is programming an additional key; an additional key implies that you have at least one working key. The second type of key programming is the firmware of a new key, which applies when you do not have an "additional key".

Almost every electrical system in a car is controlled by a separate control module. Control modules communicate with each other and with the car's main computer via the CAN bus. In some instances, the control modules may fail and thereby need to be replaced. Also, after replacement, every new control module must be programmed and connected to a common communication system so the new control module can communicate with other control modules We are up to the task in delivering high-quality control module's replacement and programming service.

There are several reasons why you can see errors related to regenerative braking and stability control on the instrumental panel or main screen. These reasons range from the issues of ABS to failures of the high-voltage system. Diagnosing the various system associated with this problem will help accurately understand the cause of the issue, and consequently take the necessary steps to resolve it.

If your Tesla's main screen takes a long time to load or does not work at all, this is an indicator that the memory of your onboard computer is full. So, you need to change the flash chip on the Media Control Unit (MCU). The onboard computer contains a flash memory chip (eMMC) that can only be written a limited number of times, before data gets corrupted. You can either wait for failure, or proactively replace and upgrade this flash chip with a more industrial, high-endurance version flash chip, with twice the memory, and our data logging sharing solution.

There are multifarious reasons why the TPMS malfunction light may display on the instrument cluster. For example, this may be due to problems with electrical wirings, seniors, etc. Computer diagnostics do not always accurately ascertain the problem but helps indicate the problem node. Our service technicians will employ their robust experience, latest tools and practices to detect the specific problem and fix it.